Everything U600/601 USB, Connection Issue?User Guides?

njfulwider5njfulwider5 Posts: 10,413FreedomPop Newbie, FreedomPop Master, Test Role, FreedomPop Expert, FreedomFan, Android Master , FP Flyer ✭✭✭✭✭
edited March 2016 in Freedom Stick Bolt (4G) #1

Freedompop U600/601

The U600/601 will only work with a 3G Plan. Please go online and make sure you have a plan that says 3g in the description. The U600/601, will not work on the Free Plan. It uses older 4g Wimax(no longer available), and Freedompop Free Plan is for 4G LTE only. Freedompop uses Sprint for all of its 4G LTE and 3G CDMA data needs. On November 6th Sprint closed all Communications with 4G Wimax. 4G Wimax signals are no longer broadcasted. Log onto your FreedomPop account and click this link>>


If your having connection issues, Please go online and make sure you have more than 100mbs left on the account. Freedompop/Sprint likes to suspend the data when it gets close to the 100mbs data cap, because of Sprint's 3 hour delay. Please verify you have more than 100mbs. If you do, please try the next step.

Try to update the Profile. The Profile update will help you connect to a local Sprint tower more efficiently. Freedompop uses Sprint for all of its 4G and 3G Data needs

Here is how to update to the Profile-

Note: Make sure you are connect to the USB Only, no other Internet devices or Modems, just the hotspot.

To perform the update, you must have Sprint SmartView open and your U600/601 USB Modem inserted in the computer in a Ready to Connect state, but do not connect to the Sprint network.

To update the data file in Sprint SmartView:

1. Go to the Sprint SmartView menu

2. Click Tools > Update Data Profile (IOTA)
If the above option is grayed out:

1. In Sprint SmartView, click Tools > Settings > Hardware tab

2. Click Modify button next to the device name

3. Click Update Profile button

Once updated, you should have connection again. This will get the U600/601 back on track to receive a signal, to broadcast Wi-Fi to the device you want to use.

Here is the Smartview Program needed to run the U600/601. (Please use Compatibility mode if you using Windows 10/8)-


Here is how to connect to your device Via USB the first time(windows)-


All U600/601, please use these tutorials-


Sprint's Main page for the unit, great to use for troubleshooting-


Here is the User Guide-


Here is the Quick Start Guide-


Great Tips and Trick, User Guides and How to's in my Signature-(Take a Peek)

Hope you find any post I have created helpful. Please look for my How to-s(Downgrading-100% Free) and (How to use the FreedomPop Community), or my Guides on FreedomPop Devices(Phones) and (Hotspots). Here is one on (FreedomPop Plans). Here is one on all (FreedomPop Apps). He is one on(Traveling with your GSM Global Sim?) or Common Question about the (GSM Global Sim). You can PM me anytime by clicking this link here njfulwider5. Than click the BUTTON with the (Small Envelope), to left of the word (MESSAGE). I will do my best help. Welcome to FreedomPop

This discussion has been closed.